http://ibls.org/mediawiki/index.php?action=history&feed=atom&title=File%3AKitsapCabooseApplyingSantaFeLogo.jpgFile:KitsapCabooseApplyingSantaFeLogo.jpg - Revision history2026-11-02T13:13:26ZRevision history for this page on the wikiMediaWiki 1.39.2http://ibls.org/mediawiki/index.php?title=File:KitsapCabooseApplyingSantaFeLogo.jpg&diff=7811&oldid=prevDnevil: Two large 10 inch diameter "Santa Fe" logos were cut from yellow vinyl. Masking tape was applied adjacent to the location of the logo. Black marks were located on the tape by measuring from the bottom of the chassis. These marks were used as aids whe...2015-11-24T04:04:24Z<p>Two large 10 inch diameter "Santa Fe" logos were cut from yellow vinyl. Masking tape was applied adjacent to the location of the logo. Black marks were located on the tape by measuring from the bottom of the chassis. These marks were used as aids whe...</p>
<p><b>New page</b></p><div>Two large 10 inch diameter "Santa Fe" logos were cut from yellow vinyl. Masking tape was applied adjacent to the location of the logo. Black marks were located on the tape by measuring from the bottom of the chassis. These marks were used as aids when applying the logo to keep it "level". The application tape has not yet been removed from the logo. Photo by [[Daris A Nevil]], September 2015.</div>Dnevil